*AOSC Forum Archive

We all know that Star_folder's is the best.

KWA makes some pretty solid guns. They have a good rps and good fps right out of the box, and usually they run for quite a long time before needing any maintenance. Did someone hack your account? I literally did a double take read on your post, checked the date, and then did all that again. lol, no...

It's most likely the motor going bad. I would consider a replacement.

So it's stuck regardless of if you have it in safe, semi, or full auto?

What brand is the gun?

KWA makes some pretty solid guns. They have a good rps and good fps right out of the box, and usually they run for quite a long time before needing any maintenance.

Updated the thread. More intel has arrived as well as some Raffle info!

If you can get it to fit well in the barrel, the next step would be making sure the nub engages it well. You want it to be level on the patch so the bb contacts the patch evenly.

An r-hop is better than an SCS nub. Assuming everything is tuned correctly, the accuracy of the rifle probably won't improve by a tremendous amount, but the range will. And with that much accuracy at range, it will greatly increase the effectiveness of a rifle.

I think you should reconsider your price. Sadly, very few thing keep their value in airsoft.

I also suggest advertising the lot on national forums if you are willing to ship, you will be more likely to find a buyer.

Flashlights give away your position and morse code isn't as efficient as English.

Benmiller3 wrote:What time will chrono open and etc. I'm trying to figure out what time I need to leave the house.

GARRETT wrote: Registration and chrono will open at 7:AM .

[align=center] https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfa1/v/t1.0-9/10806455_1738666246357983_1810141471839010568_n.jpg?oh=d15858681df2e7db291f26e1e95ba285&oe=5504EF31&__gda__=1426354874_a5dc4078cd8cca311ad8b4b08c69ef12 [/align] -In 1984 during the Cold War, a Department of Defense funded...

There aren't stronger tappet springs, what people usually do is cut the spring that's already there. Usually I cut one of the hooking loops off and bend a few more coils out to replace them.

That should only happen if something is misshapen/deformed.

Hmmm, shaving the tappet plate would definitely help push the nozzle further into the bucking lips, potentially increasing the quality of the seal. There's definitely no reason not to do the modification.