AOSC Forum Archive

The original source of this list is a thread at Arnies.

Alighty good neighbors, recently while browsing these forums, I realized that there are a lot of threads with questions for Breakdown / Takedown / Disassembly Guides for this gun or that gun and thought it would be Way easier if there was a thread with links to all these places/threads with the guides expecially since it is sometimes hard to search for three letter named guns. Post the link in this thread and I will edit it into this post and then delete the post so as to keep this as simple as possible. I'll start this:

TM M4 / M16 / M733 / etc
http://www.mechbox.com/m4m16/m733-disassembly.html

TM P90
http://www.arniesairsoft.co.uk/forums/inde...sassembly+guide

TM/CA/JG G3
http://www.youtube.com/watch?v=A2tPQbAchzg#

TM G36
http://www.mechbox.com/g36/g36c-disassembly.html

TM AK47
http://www.mechbox.com/ak47/ak47-disassembly.html

TM AUG
http://www.mechbox.com/aug/aug-disassembly.html

AGM M14
http://www.mechbox.com/m14/m14-disassembly-agm.html

JLS SCAR
http://www.mechbox.com/scar/jls-scar-disassembly.html

TM MP5
http://www.mechbox.com/mp5/mp5j-disassembly.html

VSR
http://www.madmercsairsoft.co.uk/technical...d-upgrade-guide

Warrior/Well L96
http://actualairsoft.com/wp/?p=72

M4 hop
http://www.madmercsairsoft.co.uk/technical...-unit-stripdown

G36 hop
http://www.madmercsairsoft.co.uk/technical...6-hop-stripdown

M14 Access to hop
http://www.madmercsairsoft.co.uk/technical...cessing-the-hop

M14 hop
http://www.madmercsairsoft.co.uk/technical...4-hop-stripdown

A minor note for anyone who doesn't know, CA (and hence Dboys) AR's disassemble differently than a TM. The receiver slides apart instead of folding.

MCG wrote: A minor note for anyone who doesn't know, CA (and hence Dboys) AR's disassemble differently than a TM. The receiver slides apart instead of folding.

This also applies to G&G and Combat Machines M4s as well.

Oddly, Combat Machine's upper receiver is held in place only by one body pin. The rear body pin's functionality is merely holding the gearbox in place.

I thought I might just throw this out here for you to know and save some time.

the madmercsairsoft links aren't working FYI.. I dunno why, but it's using the abbrevated link and not the full link.

^ fixed.

TM Sig SG 552