R-Hop vs SCS
Posted: Wed Dec 10, 2014 9:53 am
I currently have a Shredders Concave Spacer in my M14 and was wondering if I would see a significant difference upgrading to a R-Hop with an M nub. My accuracy is great with the SCS, but I hear the R-Hop is just amazing, and it would be nice to further increase range and accuracy. I honestly just don't want to spend several hours of work getting the r hop in correctly only to find that it shoots the same as my SCS. Any suggestions on this or the build itself would be great. Thanks for the help!
Here are my current specs for my M14:
6.01 Prometheus M14 barrel
Prometheus Bucking
SCS Spacer
Prometheus M135 Spring
Guarder: Piston, Cylinder, Cylinder head, tappet plate, nozzle, spring guide, and gears
#14 O Ring on piston
Matrix Magnum Motor
GATE MERF 3.2 Burst Advanced Mosfet
10.8V battery
Shoots 390 fps with .25g
Usually use .28 or .3g in games
Here are my current specs for my M14:
6.01 Prometheus M14 barrel
Prometheus Bucking
SCS Spacer
Prometheus M135 Spring
Guarder: Piston, Cylinder, Cylinder head, tappet plate, nozzle, spring guide, and gears
#14 O Ring on piston
Matrix Magnum Motor
GATE MERF 3.2 Burst Advanced Mosfet
10.8V battery
Shoots 390 fps with .25g
Usually use .28 or .3g in games