Hey guys new to Airsoft here I have played a few games but looking to get more out of my A&K M249 Mk2. However not sure what Brands are reliable in the airsoft industry. I am looking to get a M140 Spring and parts that will fire it reliably with out fail also wanting more range and accuracy wile keeping it around the same Rate of Fire. I will be alternating the M140 spring with an M130 depending on what field I am playing on in my area.
Here are a few parts I am looking in to if yall have any suggestions let me know plz I have no money limit on parts.
Spring: http://www.evike.com/products/26262/
Barrel: http://www.evike.com/products/24390/
Hopup: The Bull Gear with Prometheus Air Seal Chamber Hop-Up Packing (Soft Type) already own
Motor: http://www.evike.com/products/43100/
Air Nozzle: http://www.evike.com/products/32920/
Cylinder: Not sure what to get plz recommend
Cylinder Head: Plz Recommend on
Piston: http://www.evike.com/products/37851/
Piston Head: http://www.evike.com/products/51182/
Gears: Plz Recommend
Help with Upgrading My A&K M249 Mk2
Re: Help with Upgrading My A&K M249 Mk2
I'd recommend posting this on the FB group 
"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."
▲
▲ ▲
V
Re: Help with Upgrading My A&K M249 Mk2
I am using a lot of SHS parts in my AR. Motor, cylinder and piston. They are fairly cheap on amazon and they seem to be well built. No complaints so far!
