The Black Mamba Airsoft Tank
- Black Poison Airsoft
- F.N.G.
- Posts: 46
- Joined: Sun Mar 03, 2013 10:29 pm
The Black Mamba Airsoft Tank
Recently completed, we managed to roll this bad boy out for Op Downfall. It's a full conversion from a 1979 Jeep Cherokee Chief, into a deadly airsoft tank. This would be the flagship of Black Poison and all of our pride and joy! It operated flawlessly and was able to deal quite some damage over the Op. Wonderful maiden voyage and excellent game. Our whole team is very pleased with the results.
Re: The Black Mamba Airsoft Tank
Nice tank
Operation Detachment Alpha - 3871[
Vet of
Red Fox 03/02/2013
SQA: Mission: DOUBLE CROSS 03/16/2013
Blackwater 04/06/2013
TDC2: SC vs GA 04/27/2013- 04/28/2013
Op: Comet Drop 07/18/2013
Vet of
Red Fox 03/02/2013
SQA: Mission: DOUBLE CROSS 03/16/2013
Blackwater 04/06/2013
TDC2: SC vs GA 04/27/2013- 04/28/2013
Op: Comet Drop 07/18/2013
-
- I like this place!
- Posts: 98
- Joined: Tue Nov 20, 2012 6:54 am
- Location: Greenville, SC
Re: The Black Mamba Airsoft Tank
What does this beast shoot?
Team V.S.A.M
Armory:
KWA KMP9
Magpul Masada
Custom Daniel Defense DMR
Armory:
KWA KMP9
Magpul Masada
Custom Daniel Defense DMR
- Black Poison Airsoft
- F.N.G.
- Posts: 46
- Joined: Sun Mar 03, 2013 10:29 pm
Re: The Black Mamba Airsoft Tank
The main gun shoots mini tennis balls. All the little black circles you see are gun ports for the 7 guys we can fit in the back.
Re: The Black Mamba Airsoft Tank
Is that all painted plywood with a steel frame, or is it a steel frame with pieces of steel and plywood?
Veteran of:
OP: Second Sun OP: Iron Marches
OP: Phantom Hawk
OP: Phantom Hawk II
OP: Blackwater
TDC
SGC
OP: Vietnam Patrol
OP: Decisive Force
OP: Second Sun OP: Iron Marches
OP: Phantom Hawk
OP: Phantom Hawk II
OP: Blackwater
TDC
SGC
OP: Vietnam Patrol
OP: Decisive Force
- Black Poison Airsoft
- F.N.G.
- Posts: 46
- Joined: Sun Mar 03, 2013 10:29 pm
Re: The Black Mamba Airsoft Tank
The main frame is steel piping, the smaller framing was done with square piping. The frame is built into the chassis of the original Jeep and is strong enough to withstand a rollover. The "armor plating" is sheets of plywood painted black and bolted to the frame.Hotspur93 wrote:Is that all painted plywood with a steel frame, or is it a steel frame with pieces of steel and plywood?
Re: The Black Mamba Airsoft Tank
Nice, how well does the motor hold up and when fully loaded. Granted you probably won't go over 15 mph on any field for safety reasons, but does it take hills and rough terrain with ease? I would assume it did having Jeep as the base, but just curious. My friend and I were thinking about taking up a similar project and we were trying to think of the best and most efficient way to do it. Meaning that if we could have a Jeep with a 4 cylinder engine be able to support the weight when trying overcome obstacles we would shoot for that just keep the project cost effective.
Veteran of:
OP: Second Sun OP: Iron Marches
OP: Phantom Hawk
OP: Phantom Hawk II
OP: Blackwater
TDC
SGC
OP: Vietnam Patrol
OP: Decisive Force
OP: Second Sun OP: Iron Marches
OP: Phantom Hawk
OP: Phantom Hawk II
OP: Blackwater
TDC
SGC
OP: Vietnam Patrol
OP: Decisive Force
- fallout11
- I love forums!
- Posts: 330
- Joined: Tue Jul 20, 2010 1:06 pm
- Location: Warner Robins, GA
- Contact:
Re: The Black Mamba Airsoft Tank
Very nice work gents, smart of you to think of rollover protection (and hence possibility) on the front end.
Also nice use of the shower pan liner to shroud the cannon's mantlet.
Is the cannon a 2" bore? If so, have you looked at Nerf mini vortex foam rockets instead of the mini tennis balls? Sadly a lot of insured fields (example: Fulda Gap at CDWC) won't let you use anything else (and it was a fight to get them approved, they've since become a scenario pball standard). Not sure about the mini tennis balls (same as doggy toy 1.5" tennis balls?), but a regular tennis ball weighs several times as much as the Nerf round, and can actually knock someone unconscious at regular (~220fps) cannon velocities.
If in fact it is a 1.5" and you're using the pet toy tennis balls, I must say that is quite clever. How does it perform?
Also nice use of the shower pan liner to shroud the cannon's mantlet.
Is the cannon a 2" bore? If so, have you looked at Nerf mini vortex foam rockets instead of the mini tennis balls? Sadly a lot of insured fields (example: Fulda Gap at CDWC) won't let you use anything else (and it was a fight to get them approved, they've since become a scenario pball standard). Not sure about the mini tennis balls (same as doggy toy 1.5" tennis balls?), but a regular tennis ball weighs several times as much as the Nerf round, and can actually knock someone unconscious at regular (~220fps) cannon velocities.
If in fact it is a 1.5" and you're using the pet toy tennis balls, I must say that is quite clever. How does it perform?
Last edited by fallout11 on Tue Mar 05, 2013 12:41 pm, edited 1 time in total.
- fallout11
- I love forums!
- Posts: 330
- Joined: Tue Jul 20, 2010 1:06 pm
- Location: Warner Robins, GA
- Contact:
Re: The Black Mamba Airsoft Tank
Also, although I've not seen it up close and personal yet, I'd suggest adding some ventilation to the interior, perhaps replace a few of the plexiglass/lexan "windows" with mesh grating or similar. Bet it gets hot in there otherwise, even in the winter.
This will also allow for better hearing/communication from inside the vehicle to those nearby, both for safety ("I'm backing up!") and for tactical considerations ("They're over there!").
Also might consider adding a small flagpole or similar inside the vehicle that you can raise/wave/put up/out the top, so you have some way to denote when you are out of action, assuming you don't already have something along those lines.
This will also allow for better hearing/communication from inside the vehicle to those nearby, both for safety ("I'm backing up!") and for tactical considerations ("They're over there!").
Also might consider adding a small flagpole or similar inside the vehicle that you can raise/wave/put up/out the top, so you have some way to denote when you are out of action, assuming you don't already have something along those lines.
- Black Poison Airsoft
- F.N.G.
- Posts: 46
- Joined: Sun Mar 03, 2013 10:29 pm
Re: The Black Mamba Airsoft Tank
This Jeep is one of the older big Jeeps. It has a V8 360 engine, so it doesn't strain at all and the mud tires means it can get just about anywhere. Believe it or not, with only two people, the tank is actually lighter than it was stock. However, when fully loaded, some extra leafs had to be added to the suspension to keep it from bottoming out. If you want to make a tank out of a 4 cylinder, I'd think it would work perfectly fine as long as it isn't used for a troop transport.Hotspur93 wrote:Nice, how well does the motor hold up and when fully loaded. Granted you probably won't go over 15 mph on any field for safety reasons, but does it take hills and rough terrain with ease? I would assume it did having Jeep as the base, but just curious. My friend and I were thinking about taking up a similar project and we were trying to think of the best and most efficient way to do it. Meaning that if we could have a Jeep with a 4 cylinder engine be able to support the weight when trying overcome obstacles we would shoot for that just keep the project cost effective.
- Black Poison Airsoft
- F.N.G.
- Posts: 46
- Joined: Sun Mar 03, 2013 10:29 pm
Re: The Black Mamba Airsoft Tank
Thank you! We did alot of thinking and brainstorming to set it all up.fallout11 wrote:Very nice work gents, smart of you to think of rollover protection (and hence possibility) on the front end.
Also nice use of the shower pan liner to shroud the cannon's mantlet.
Is the cannon a 2" bore? If so, have you looked at Nerf mini vortex foam rockets instead of the mini tennis balls? Sadly a lot of insured fields (example: Fulda Gap at CDWC) won't let you use anything else (and it was a fight to get them approved, they've since become a scenario pball standard). Not sure about the mini tennis balls (same as doggy toy 1.5" tennis balls?), but a regular tennis ball weighs several times as much as the Nerf round, and can actually knock someone unconscious at regular (~220fps) cannon velocities.
If in fact it is a 1.5" and you're using the pet toy tennis balls, I must say that is quite clever. How does it perform?
Well, unfortunately, we keep details of the gun design and performance classified. However, let's just say we used a few tricks that no other gun has and the tennis balls we shoot are no heavier than a nerf football. Also, the gun is able to use different PSI loads to ensure low impact velocity at certain ranges. Say, 25psi for 100ft and lower and scaling up from there.
As for the ventilation, we learned a hard lesson on that last game. It was extremely hot in the tank due to the engine roaring and so many bodies moving around. We used lexan windows, but we'll be replacing them with mesh soon.
And we have a hatch on the top with a "Don't Tread on Me" flag we stick out when shot. So that's covered.
Re: The Black Mamba Airsoft Tank
It looked a lot more intimidating in person, haha. Was very fun to play against... "Tank is coming! Fall back and get the RPG here!"
My favorite encounter against it was when you guys pulled down into Honshu/Coronet (day 1) and our entire team ran back towards Coronet except for me and some other guy who ran the opposite way. We ended up on the top of the hillside, just above the main road, looking down at the tank. I was like "Should we go?" until all of a sudden the back door of the tank opens and we start spraying a rain of BB's down at all of the players exiting. Got a few of them before we were both taken out, but that was definitely one of my favorite highlights from that event.
My favorite encounter against it was when you guys pulled down into Honshu/Coronet (day 1) and our entire team ran back towards Coronet except for me and some other guy who ran the opposite way. We ended up on the top of the hillside, just above the main road, looking down at the tank. I was like "Should we go?" until all of a sudden the back door of the tank opens and we start spraying a rain of BB's down at all of the players exiting. Got a few of them before we were both taken out, but that was definitely one of my favorite highlights from that event.
- fallout11
- I love forums!
- Posts: 330
- Joined: Tue Jul 20, 2010 1:06 pm
- Location: Warner Robins, GA
- Contact:
Re: The Black Mamba Airsoft Tank
Say no more.Black Poison Airsoft wrote: Well, unfortunately, we keep details of the gun design and performance classified. However, let's just say we used a few tricks that no other gun has and the tennis balls we shoot are no heavier than a nerf football.
- Black Poison Airsoft
- F.N.G.
- Posts: 46
- Joined: Sun Mar 03, 2013 10:29 pm
Re: The Black Mamba Airsoft Tank
That was the only time the infantry took a hit on the way out. Me and the driver were trying to find where those bb's were coming from!Tiger wrote:It looked a lot more intimidating in person, haha. Was very fun to play against... "Tank is coming! Fall back and get the RPG here!"
My favorite encounter against it was when you guys pulled down into Honshu/Coronet (day 1) and our entire team ran back towards Coronet except for me and some other guy who ran the opposite way. We ended up on the top of the hillside, just above the main road, looking down at the tank. I was like "Should we go?" until all of a sudden the back door of the tank opens and we start spraying a rain of BB's down at all of the players exiting. Got a few of them before we were both taken out, but that was definitely one of my favorite highlights from that event.
You guys seemed very shy to use the RPG the first day though. We saw it maybe once the whole 1st day. Which was kinda odd, because I know we aren't exactly quiet or stealthy either!
- idiot88
- I do in fact have a life.
- Posts: 618
- Joined: Sat Oct 31, 2009 10:58 pm
- Location: Charleston area
Re: The Black Mamba Airsoft Tank
Your vehicle reminds me of the BTR-152.
http://www.google.com/search?q=soviet+a ... 00&bih=495
The trapezoid shaped add-on on the back of yours- what are the advantages of having this add-on as opposed to just having the doors flush with the back?
http://www.google.com/search?q=soviet+a ... 00&bih=495
The trapezoid shaped add-on on the back of yours- what are the advantages of having this add-on as opposed to just having the doors flush with the back?