Sniper Rifle/Designated Marskmen's Rifle Thread
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
That gun is two inches taller than my wife.
Outer barrels shouldn't make contact with the BB, and other than possible minor changes to the FPS they should do just about nothing except look good, or in this case, bad. Also, they can get in the way. There's a reason why we have been trying to make firearms shorter while still maintaining range and accuracy for more than four hundred years, it's simply more practical to carry a shorter weapon.
Glad to hear you were kidding. Watch out though, now Luke is going to battle you for longest gun.
Outer barrels shouldn't make contact with the BB, and other than possible minor changes to the FPS they should do just about nothing except look good, or in this case, bad. Also, they can get in the way. There's a reason why we have been trying to make firearms shorter while still maintaining range and accuracy for more than four hundred years, it's simply more practical to carry a shorter weapon.
Glad to hear you were kidding. Watch out though, now Luke is going to battle you for longest gun.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
yeah, he can have that title. i honestly was having difficulty with its length back at airfarm. now, it would be almost impossible to use. i will keep the bipod on it though. its a little wobbly, but it will do the trick. i'l probably remove the front peice for my newly moded m4 and put that with the "amplifier" on the end. (its in the second picture.
-
- I like this place!
- Posts: 78
- Joined: Tue Feb 21, 2012 10:57 pm
- Location: Summerville, SC
- Contact:
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
Here is my Echo 1 ER-25K, I figure it goes in here.
It has a number of upgrades:
Echo 1 Torque Up Motor
Madbull 509mm 6.03 tight bore
Madbull PX-02 Piston
Modify Aluminum Ported Piston Head
Prometheus Hop Up Bucking ( Hard Type )
Shimmed to the Pinion
Madbull M140 Irregular Pitch Spring
- There is a ported cylinder in this rifle for a reason.
Matrix 3-9x50 Illuminated Reticle Sniper Scope
Last but not least: Manly Mustache
With all of the mods it is consistently shooting 376 - 382 w/.30g at 15rps on a 9.6 NiMH
It has a number of upgrades:
Echo 1 Torque Up Motor
Madbull 509mm 6.03 tight bore
Madbull PX-02 Piston
Modify Aluminum Ported Piston Head
Prometheus Hop Up Bucking ( Hard Type )
Shimmed to the Pinion
Madbull M140 Irregular Pitch Spring
- There is a ported cylinder in this rifle for a reason.
Matrix 3-9x50 Illuminated Reticle Sniper Scope
Last but not least: Manly Mustache
With all of the mods it is consistently shooting 376 - 382 w/.30g at 15rps on a 9.6 NiMH
- Echo1 Operator
- Echo1 Rep
- Posts: 778
- Joined: Sat Feb 20, 2010 6:35 pm
- Contact:
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
Socom Gear Snipor Rifle
Vet of: Redfox Feb. 19, TDC, Airfarm May 28, CID2, PWC 2, OP Blackwater 2, OP:24-3, Elite Squad Games, Op: Flash Heaven, 38th Parallel, OP: Second Sun, OP: SOCO, COB 2, OP: Ice Cubed, Airfarm Aug 4th, Fulda Gap 2012, Red fox Sep. 15, Red fox March 2, PBC March 30, TDC 2, Op: Comet Drop, PBC Aug. 8, Fulda Gap 2013, Redfox Nov. 23, Red fox Jan 18, Airfarm Feb 15OP: SOCO, COB 2, OP: Ice Cubed, Airfarm Aug 4th, Fulda Gap 2012,OP: Second Sun, OP: SOCO, COB 2,
TEH SCAA WILL RISE AGAIN
TEH SCAA WILL RISE AGAIN
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
I love fluted barrels.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
- Star_folder
- AJAXian
- Posts: 1671
- Joined: Tue Jul 27, 2010 11:34 am
- Location: Lexington/Pelion
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
Coming soon to a field near you.
[align=center][/align]
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
Is that real wood I see? Very sexy, except for all that superfluous RIS up front of course.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
- Star_folder
- AJAXian
- Posts: 1671
- Joined: Tue Jul 27, 2010 11:34 am
- Location: Lexington/Pelion
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
Yes, real wood indeed. Refinished and everything. And let's be honest, that RIS is better than anything else I could have there.Dominum wrote:Is that real wood I see? Very sexy, except for all that superfluous RIS up front of course.
[align=center][/align]
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
Methinks heat shield may look better, but then, I have never been one for lots of spiffy RIS. Maybe I am a stick in the mud.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
- Romba
- I do in fact have a life.
- Posts: 1486
- Joined: Sun Feb 06, 2011 3:08 pm
- Location: Greenville, SC
- Contact:
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
CA M14: good DMR platform? And thing I should know about the CA version of the m14?
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
If you are going to make an M14 DMR, make it out of a CA or a G&G. I'll see if I can find that review I used to reference that has a complete list of parts compatibility, but until then suffice it to say that it uses all kinds of fun, non-M14 specific parts that true V7s do not.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
- Romba
- I do in fact have a life.
- Posts: 1486
- Joined: Sun Feb 06, 2011 3:08 pm
- Location: Greenville, SC
- Contact:
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
But is the CA version specifically a good DMR platform? Are parts more expensive?
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
Yes. No, they are by and large less expensive and much easier to find than in a true V7 like TM and TM clones.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
- Romba
- I do in fact have a life.
- Posts: 1486
- Joined: Sun Feb 06, 2011 3:08 pm
- Location: Greenville, SC
- Contact:
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
Okay. It would be much appreciated of you found that parts list.
- Star_folder
- AJAXian
- Posts: 1671
- Joined: Tue Jul 27, 2010 11:34 am
- Location: Lexington/Pelion
Re: Sniper Rifle/Designated Marskmen's Rifle Thread
If CA's are a true G&G clone, then the parts list will look something like this:
V3 Spring guide
G&G M14 Cylinder head
AUG/Long AK length air nozzle
G&G M14 Tappet plate
AUG hop up chamber
V2/3 gears
Short motor
G&G M14 cut off lever
Standard spring, piston, piston head, and cylinder
Standard cut barrel (obviously to work with the AUG hop up unit)
The ARL is G&G M14 specific.
And that should just about cover it.
V3 Spring guide
G&G M14 Cylinder head
AUG/Long AK length air nozzle
G&G M14 Tappet plate
AUG hop up chamber
V2/3 gears
Short motor
G&G M14 cut off lever
Standard spring, piston, piston head, and cylinder
Standard cut barrel (obviously to work with the AUG hop up unit)
The ARL is G&G M14 specific.
And that should just about cover it.
[align=center][/align]