The original source of this list is a thread at Arnies.
Alighty good neighbors, recently while browsing these forums, I realized that there are a lot of threads with questions for Breakdown / Takedown / Disassembly Guides for this gun or that gun and thought it would be Way easier if there was a thread with links to all these places/threads with the guides expecially since it is sometimes hard to search for three letter named guns. Post the link in this thread and I will edit it into this post and then delete the post so as to keep this as simple as possible. I'll start this:
TM M4 / M16 / M733 / etc
http://www.mechbox.com/m4m16/m733-disassembly.html
TM P90
http://www.arniesairsoft.co.uk/forums/inde...sassembly+guide
TM/CA/JG G3
http://www.youtube.com/watch?v=A2tPQbAchzg#
TM G36
http://www.mechbox.com/g36/g36c-disassembly.html
TM AK47
http://www.mechbox.com/ak47/ak47-disassembly.html
TM AUG
http://www.mechbox.com/aug/aug-disassembly.html
AGM M14
http://www.mechbox.com/m14/m14-disassembly-agm.html
JLS SCAR
http://www.mechbox.com/scar/jls-scar-disassembly.html
TM MP5
http://www.mechbox.com/mp5/mp5j-disassembly.html
VSR
http://www.madmercsairsoft.co.uk/technical...d-upgrade-guide
Warrior/Well L96
http://actualairsoft.com/wp/?p=72
M4 hop
http://www.madmercsairsoft.co.uk/technical...-unit-stripdown
G36 hop
http://www.madmercsairsoft.co.uk/technical...6-hop-stripdown
M14 Access to hop
http://www.madmercsairsoft.co.uk/technical...cessing-the-hop
M14 hop
http://www.madmercsairsoft.co.uk/technical...4-hop-stripdown
Breakdown / Takedown / Disassembly Guides
Breakdown / Takedown / Disassembly Guides
Last edited by SteevoLS on Sat Mar 20, 2010 9:07 pm, edited 1 time in total.
There's no kill switch on awesome!
Re: Breakdown / Takedown / Disassembly Guides
A minor note for anyone who doesn't know, CA (and hence Dboys) AR's disassemble differently than a TM. The receiver slides apart instead of folding.
Kill bodies and slay dragons.
-
- I do in fact have a life.
- Posts: 620
- Joined: Wed Feb 17, 2010 9:45 am
- Location: Rock Hill, SC
- Contact:
Re: Breakdown / Takedown / Disassembly Guides
This also applies to G&G and Combat Machines M4s as well.MCG wrote: A minor note for anyone who doesn't know, CA (and hence Dboys) AR's disassemble differently than a TM. The receiver slides apart instead of folding.
Carolina Border Wars 2010
OP:AoWL
Op:White Noise 2
Op:Banshee
Op:Blackwater 2
Fulda Gap 2011 - NATO
OP:AoWL
Op:White Noise 2
Op:Banshee
Op:Blackwater 2
Fulda Gap 2011 - NATO
Re: Breakdown / Takedown / Disassembly Guides
Oddly, Combat Machine's upper receiver is held in place only by one body pin. The rear body pin's functionality is merely holding the gearbox in place.
I thought I might just throw this out here for you to know and save some time.
I thought I might just throw this out here for you to know and save some time.
- Jeremy314
- I do in fact have a life.
- Posts: 532
- Joined: Mon Jan 25, 2010 11:27 pm
- Location: Myrtle Beach, SC
- Contact:
Re: Breakdown / Takedown / Disassembly Guides
the madmercsairsoft links aren't working FYI.. I dunno why, but it's using the abbrevated link and not the full link.
VFC KAC PDW * WE PDW * KWA MP7A1 * KWA G36c * G&G CM M4 custom
2013 OPs: Mission: Double Cross Vet * SQA Skirmish 4/6/13 Vet
2014 OPs: OP: Iron Marches Vet