Bolt Action Build Off! Dec. 14th SQA

Romba · Post by **Romba** » Mon Aug 05, 2013 6:30 pm

Meh. Is it really that important? Laylax am expensive.

Post by **Dominum** » Mon Aug 05, 2013 6:47 pm

I have no experience with that cylinder, so I can't say for sure, but that is a general rule of thumb.

Swimmer1222 · Post by **Swimmer1222** » Thu Aug 08, 2013 1:38 pm

Just finished the tdc mod. Only a couple more things left to do on the list! Should be up and playing with it at RR, would post pics but not exactly sure how, (never needed to before)

marpat96 · Post by **marpat96** » Thu Aug 08, 2013 5:31 pm

Swimmer1222 wrote:Just finished the tdc mod. Only a couple more things left to do on the list! Should be up and playing with it at RR, would post pics but not exactly sure how, (never needed to before)

I'll be at RR too, with my boltys. I would like to see your TDC mod, if you don't mind.

Swimmer1222 · Post by **Swimmer1222** » Thu Aug 08, 2013 7:05 pm

I will meet ya there! Just tested it and installed my laylax zero trig and piston and sp170. This thing is nuts! Tdc mod does wonders.

ibeezthecapn · Post by **ibeezthecapn** » Fri Aug 09, 2013 9:18 pm

aaaaand i just destroyed my hopup. may be out.

TokenTech89 · Post by **TokenTech89** » Mon Aug 12, 2013 10:02 am

ibeezthecapn wrote:aaaaand i just destroyed my hopup. may be out.

for the svd? how?

TokenTech89 · Post by **TokenTech89** » Thu Sep 12, 2013 12:32 pm

Tried to do the 45 degree setup for the build. But due to the angle that the pisotn was being put in, it made the bolt push hard to do, so going for a 90 degree piston build....

How is everyone else doing?

Post by **Star_folder** » Thu Sep 12, 2013 2:14 pm

Well, I've got a huge air break on mine right now. And in an effort to get more power from the spring, I've added spring spacers. However, I have too many, and it makes it difficult to rack the bolt. So... I think the solution is to get a bigger spring.

Skywalker · Post by **Skywalker** » Fri Sep 13, 2013 8:35 am

Rolls eyes

TokenTech89 · Post by **TokenTech89** » Fri Sep 13, 2013 2:23 pm

just dropped 175 on parts to finish up. after that, siliencing the bad boy and then paint it.

TokenTech89 · Post by **TokenTech89** » Mon Sep 30, 2013 12:39 pm

Rummaged the interwebz and found a left handed mod. Oh joy,

Skywalker · Post by **Skywalker** » Fri Oct 11, 2013 9:23 am

Hey all, I won't be able to make it to a game until December at this point, because I am out of town for work/vacations almost every single weekend until then.

Obviously it was no one's intention for this to drag on this long, but I just wanted to state where I am in terms of scheduling an actual build off competition day. Certainly, a game in the Columbia would be the best location for holding the event, so we have even drive times for people in the lowcountry and upstate.

Lets get some feedback on this and pick a date for the actual event.

TokenTech89 · Post by **TokenTech89** » Mon Oct 28, 2013 9:16 pm

Rifle is done, need to paint it

Post by **Star_folder** » Tue Oct 29, 2013 6:31 am

I need a new bucking, and some paint.

Also, looks like we'll be having the actual competition on Dec 14th.

*AOSC Forum Archive

Bolt Action Build Off! Dec. 14th SQA

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!

Re: Bolt Action Build Off!