New Gearbox

TeamBadCompany · Post by **TeamBadCompany** » Wed Apr 20, 2011 3:27 pm

I want to get a new complete gearbox for my DBoys m4, are there any good ones less than $80? the dboys one is $55 but the bushings in my current dboys gearbox are terrible.

Hatch · Post by **Hatch** » Wed Apr 20, 2011 3:49 pm

TeamBadCompany wrote:I want to get a new complete gearbox for my DBoys m4, are there any good ones less than $80? the dboys one is $55 but the bushings in my current dboys gearbox are terrible.

http://www.scairsoftsupply.com/products ... Shell.html

TeamBadCompany · Post by **TeamBadCompany** » Wed Apr 20, 2011 3:53 pm

I want a completely assembled drop-in gearbox and i dont want to do any wiring to it. Would this fit in a dboys m4? http://echo1usa.com/English/index.php?m ... e1a56cb218

TeamBadCompany · Post by **TeamBadCompany** » Wed Apr 20, 2011 3:58 pm

Are JG gearboxes any good?

Vesper · Post by **Vesper** » Wed Apr 20, 2011 6:03 pm

It's hard to find an entire functioning gearbox with $80 that will last a while at a good working condition.
Save up some money and go to the higher end internals. You get what you pay for.

Post by **SteevoLS** » Wed Apr 20, 2011 6:29 pm

Let me get this straight... you have cheap (nylon?) bushings in your otherwise functional gearbox. Instead of dropping $5-10 on some steel bushings, you want a whole new gearbox?

TeamBadCompany · Post by **TeamBadCompany** » Wed Apr 20, 2011 9:33 pm

no when i replaced my my crappy metal bushings one of the wires is grounded and the battery might explode in my face, and i dont know how to re-wire it.

VoidSuicide · Post by **VoidSuicide** » Thu Apr 21, 2011 1:27 pm

One normally would remove things such as batteries before messing with anything electrical...

stuckmojo · Post by **stuckmojo** » Thu Apr 21, 2011 4:28 pm

i have a echo1 gear box with 6mm stainless steel bushing and ball bearings. m100 spring wired to the rear with deans. bevel gear has been replaced lately and the piston was replaced about 3 months ago. the gear box was completely rewired 1 year ago and wireing harness replace. has heavy duty 16 gauge wire. i will let you have it for 80

TeamBadCompany · Post by **TeamBadCompany** » Thu Apr 21, 2011 6:00 pm

Stealth Hero wrote:One normally would remove things such as batteries before messing with anything electrical...

I was testing my repairs after i put it back together
And mojo, approx what fps does your gearbox shoot with an m100?

stuckmojo · Post by **stuckmojo** » Thu Apr 21, 2011 7:46 pm

300 with .25 bb's its cqb rated i probally have a m120 around here i could throw in

TeamBadCompany · Post by **TeamBadCompany** » Thu Apr 21, 2011 9:31 pm

how much with 120?

Post by **SteevoLS** » Thu Apr 21, 2011 9:34 pm

... the same as any other gearbox with a M120.

TeamBadCompany · Post by **TeamBadCompany** » Thu Apr 21, 2011 9:36 pm

still new to the whole spring strengths and all ,so can you enlighten me?

stuckmojo · Post by **stuckmojo** » Fri Apr 22, 2011 9:18 am

no charge for the m120 i will throw it in the deal with the gear box so you will be getting to springs. just send me a pm if your interested

*AOSC Forum Archive

New Gearbox

New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox

Re: New Gearbox