Latest Acquisition

[Star_folder]

I just might know where you can get one.

[Star_folder]

[TokenTech89]

Where on earth can you even use that spring to play?!?!?!?

[Star_folder]

Where on earth can you even use that spring to play?!?!?!?

Oh, I can use it here, 100% field legal too. Free hugs for anyone who guesses correctly on how I plan to use it.

[Felix]

M14?

[Star_folder]

M14?

Nooooope! You're cold, btw, I've already got an M140 for the M14.

[JumpGunner]

mp5 or p90 w/duel sector gear. just my guess

[Star_folder]

mp5 or p90 w/duel sector gear. just my guess

Very close, so I'll give it to you, lol. I told myself that anyone who said DSG would "win." My FN2000 has one, and currently has an M160. I recently made a purchase of some buckings, and they had these things for $5, so I just figured, why not! The M160 chronoed at 345 with .2s, so about 310-320 with .25s. I'm hoping the M190 will push me right up to the 350-360fps 20ft MED limit.

[JumpGunner]

that sounds about right, is the m160 and the m190 both irregular or are they different, if so they could net different results. have fun getting it in too. A m160 is a pain in the butt to get in. The only time I would even give it (m190) a shot is if there was a quick release.

[Star_folder]

Both are irregular SHS springs, so it should be a good bit stronger. This spring is quite impressive, I'm having troubles compressing it with my hands, even the S170s that I've messed with before I could more or less manipulate with my hands.

[JumpGunner]

now the question is, what motor. A standard high speed motor is out the window. systema magnum or some other high torque. what rof are you shooting for.

[JumpGunner]

and sorry if i come out questioning your methods, I'm curious aboutyour results to possibly mimick in the future.

[Star_folder]

Systema magnum is a waste of money and a turd of a motor. I've got strong feelings because for a $100 motor, they should work a heck of a lot better than they do.

My motor is a Lonex A2 torque, the DSG paired with Prometheus Gears, an SHS 15 tooth piston, a nice mosfet wired to deans, 14 gauge wire, and the rest is stock.

And it's no problem, I enjoy sharing my experiences.

[JumpGunner]

That sounds beastly. what gear ratio? 13:1, 16:1, 18:1?

[Star_folder]

It's a standard 18:1 gear ratio. I'm getting 31rps on a 7.4v, 52rps on a small 11.1v, and a small 14.8v did 65rps, but it also destroyed some gears, and the piston. I've since repaired the parts, but haven't tried a 14.8v again. Part of me thinks it might have been PE wtih the 14.8v, and the M190 would stop that from happening, meaning I could safely use a 14.8v with the gun.