AOSC Forum Archive

I may steal your build, I have a spare mp5 ver2 gb that has a 32 ROF with a high speed motor on a 11.1 lipo. only 330 fps with .25's though. maybe we will be on opposite teams someday, or even the same team. that may scare someone to death.

lol, I think it's a good solid build. It'd be fun to take it out to the field and put some fear in my opponents. :p Perhaps one day I'll get some speed gears for the build to get even more out of the gun.

You need a motor with a lot of torque to run a DSG, I have used an AMP T5000 and I forget what the other one I used was. Obviously the Lonex you used did great. I use the high speed ratio Riot full set of gears with the DSG, though I have another DSG by itself that I have previously used with other gears, they ran for a few thousands rounds and shaved off all the bottom teeth on the bevel, which I think was Systema. I shimmed them the night before last, and last night I added sorbo on the cylinder head and shaved of a tooth and a half to make the AoE absolutely perfect. I am using the SHS steel tooth blue polycarb bodied piston (same as you I think). It's going in a P90 or Thompson. TM V6 shell, TM wiring + MOSFET, steel bushings (forgot brand), stock TM tappet plate (modified for DSG of course), stock TM cylinder and cylinder head (with teflon and sorbo added for compression and AoE), random polycarb piston head I had lying around, steel ball bearing spring guide, airnozzle with O ring. I also made a "part" that remedies a problem that only occurs with DSGs, pics and an explanation later.

Sounds like a good build there. I'm using the 15 tooth piston, not the 14 tooth piston. The 15 tooth has a bit better support than the 14 tooth.

Yep, we're using the exact same piston. I am afraid the 14 would not stand up to it as long. Though now it has become a 14 tooth piston due to my dremel lol.

Also, I use the custom short spring and spring guide spacer. Last time it gave me a 20' MED, though I don't remember the exact FPS. I expect more FPS this time though because when I did it last time I didn't take the time to do any of it right, I was in a real hurry so I basically just did it so it would run. This time I am doing it perfectly. The first time I ever did it I think I used either an M150 or an M170.

Riot's not making his springs anymore, at least I don't think so, so I'm stuck with using "normal" springs.

I think I got it from Skywalker a few months ago, who knows how old it is.

I recently acquired my recommended first degree black belt in Taekwondo.

Czech desert camo shirt tested for the first Gulf war but not put into active duty.
The official idiot88 camo for Blue Hole.

Jeez that looks like it may be the BEST camo for BH all around!

Dominum wrote:

I just finished putting it in. I had forgotten that the Glock has a lot less room than the M93Rs, but it was nothing that cutting the LiPo down to the bare minimum, splitting the cells and placing them under the inner barrel, applying liquid electrical tape to the now exposed joints, cutting off a lot of the barrel cover, cutting off parts of the inside of the slide, various other dremeling, and soldering on the the new connectors couldn't fix! If I remember correctly that's how Stephen did his old one too. I'm happy to once again have a custom LiPo awesomesauce AEP, and this time I will actually use it because it is a Glock. Now I just need more mags.

All en route:

Kodak PlaySport Zx3


Macro Lens


SD Card


Another Chrono


AEP Glock mags (x6)

Echo1 Operator wrote:

Cute, who's the father?