Latest Acquisition
-
- I like this place!
- Posts: 78
- Joined: Tue Feb 21, 2012 10:57 pm
- Location: Summerville, SC
- Contact:
Re: Latest Acquisition
I may steal your build, I have a spare mp5 ver2 gb that has a 32 ROF with a high speed motor on a 11.1 lipo. only 330 fps with .25's though. maybe we will be on opposite teams someday, or even the same team. that may scare someone to death.
- Star_folder
- AJAXian
- Posts: 1671
- Joined: Tue Jul 27, 2010 11:34 am
- Location: Lexington/Pelion
Re: Latest Acquisition
lol, I think it's a good solid build. It'd be fun to take it out to the field and put some fear in my opponents. :p Perhaps one day I'll get some speed gears for the build to get even more out of the gun.
[align=center][/align]
Re: Latest Acquisition
You need a motor with a lot of torque to run a DSG, I have used an AMP T5000 and I forget what the other one I used was. Obviously the Lonex you used did great. I use the high speed ratio Riot full set of gears with the DSG, though I have another DSG by itself that I have previously used with other gears, they ran for a few thousands rounds and shaved off all the bottom teeth on the bevel, which I think was Systema. I shimmed them the night before last, and last night I added sorbo on the cylinder head and shaved of a tooth and a half to make the AoE absolutely perfect. I am using the SHS steel tooth blue polycarb bodied piston (same as you I think). It's going in a P90 or Thompson. TM V6 shell, TM wiring + MOSFET, steel bushings (forgot brand), stock TM tappet plate (modified for DSG of course), stock TM cylinder and cylinder head (with teflon and sorbo added for compression and AoE), random polycarb piston head I had lying around, steel ball bearing spring guide, airnozzle with O ring. I also made a "part" that remedies a problem that only occurs with DSGs, pics and an explanation later.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
- Star_folder
- AJAXian
- Posts: 1671
- Joined: Tue Jul 27, 2010 11:34 am
- Location: Lexington/Pelion
Re: Latest Acquisition
Sounds like a good build there. I'm using the 15 tooth piston, not the 14 tooth piston. The 15 tooth has a bit better support than the 14 tooth.
[align=center][/align]
Re: Latest Acquisition
Yep, we're using the exact same piston. I am afraid the 14 would not stand up to it as long. Though now it has become a 14 tooth piston due to my dremel lol.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
Re: Latest Acquisition
Also, I use the custom short spring and spring guide spacer. Last time it gave me a 20' MED, though I don't remember the exact FPS. I expect more FPS this time though because when I did it last time I didn't take the time to do any of it right, I was in a real hurry so I basically just did it so it would run. This time I am doing it perfectly. The first time I ever did it I think I used either an M150 or an M170.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
- Star_folder
- AJAXian
- Posts: 1671
- Joined: Tue Jul 27, 2010 11:34 am
- Location: Lexington/Pelion
Re: Latest Acquisition
Riot's not making his springs anymore, at least I don't think so, so I'm stuck with using "normal" springs.
[align=center][/align]
Re: Latest Acquisition
I think I got it from Skywalker a few months ago, who knows how old it is.
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
- Doublewolf
- I do in fact have a life.
- Posts: 643
- Joined: Sun Jan 03, 2010 7:29 pm
- Location: Savannah, GA
- idiot88
- I do in fact have a life.
- Posts: 618
- Joined: Sat Oct 31, 2009 10:58 pm
- Location: Charleston area
Re: Latest Acquisition
Czech desert camo shirt tested for the first Gulf war but not put into active duty.
The official idiot88 camo for Blue Hole.
The official idiot88 camo for Blue Hole.
Re: Latest Acquisition
Jeez that looks like it may be the BEST camo for BH all around!
[align=center]Delta Bravo Niner
[/align]
[/align]
Re: Latest Acquisition
I just finished putting it in. I had forgotten that the Glock has a lot less room than the M93Rs, but it was nothing that cutting the LiPo down to the bare minimum, splitting the cells and placing them under the inner barrel, applying liquid electrical tape to the now exposed joints, cutting off a lot of the barrel cover, cutting off parts of the inside of the slide, various other dremeling, and soldering on the the new connectors couldn't fix! If I remember correctly that's how Stephen did his old one too. I'm happy to once again have a custom LiPo awesomesauce AEP, and this time I will actually use it because it is a Glock. Now I just need more mags.Dominum wrote:
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
Re: Latest Acquisition
All en route:
Kodak PlaySport Zx3
Macro Lens
SD Card
Another Chrono
AEP Glock mags (x6)
Kodak PlaySport Zx3
Macro Lens
SD Card
Another Chrono
AEP Glock mags (x6)
[align=center][/align]
[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
- Echo1 Operator
- Echo1 Rep
- Posts: 778
- Joined: Sat Feb 20, 2010 6:35 pm
- Contact:
Re: Latest Acquisition
Cute, who's the father?Echo1 Operator wrote:
[align=center]Delta Bravo Niner
[/align]
[/align]