-NOT QUITTING- OP:24 II

[Jeremy314]

LOCATION(S): Myrtle Beach, SC OP:24 II

PAYMENT PREFERENCE(S): Paypal prefered

ITEM(S): KWA G36c,KWA USP Tactical, Pantac Holster, Gemtech G5, barrel extention set

PART OUT?:Preferably not

ACCEPT/OFFER TRADE(S)?: Not at this time

Alrighty then. Let's get this outta the way. I AM NOT QUITTING, I just have some other priorities at the moment and I need some cash.

I will -NOT- be shipping any gun or the G5. I also will not physically be at OP:24 II, but Rev will be there and will have every item that sells to give to the new owners.

DESCRIPTION: KWA G36c Gen 1.5 Black gear box, last production run before the 2GX G36 series came out. Comes with ASGI 6.03 TBB, 1 point bungee sling, two 2 9.6 1600maH batteries, and 8 Mags: 1 KWA hicap that doesn’t seem to fit in the magwell correctly anymore, 4 MAG mids and 2 Star mids and 1 not so good condition Star mid (bottom screw hole was broken when I got it but now completely broken not sure how to fix.)  CHRONOS @ 385 w/.2
PRICE: $300
PICTURE:
[img width=829 height=660]http://i591.photobucket.com/albums/ss35 ... 9723-1.jpg[/img]

[glow=red,2,300]SPF[/glow] DESCRIPTION: GEMTECH G5 CCW flash hider and mock suppressor. Will not fit on G36 without the smallest piece of the barrel extension set, but still have to unscrew flash hider to remove hand guard for battery installation/removeal as the quick attach/detach tabs block the hand guard from comes off.
PRICE: $20 [glow=red,2,300]SPF[/glow]
PICTURE: SEE BELOW

[glow=red,2,300]SPF[/glow] DESCRIPTION: Matrix 3 piece barrel extension. Was going to use this to extend the G36C to a G36K+ length barrel but never came to fruition.
Price: $20 [glow=red,2,300]SPF[/glow]
PICTURE:
[img width=639 height=550]http://i591.photobucket.com/albums/ss35 ... 9728-1.jpg[/img]


[glow=red,2,300]Package deals:[/glow]
GEMTECH G5 and Barrel extension set: $35 [glow=red,2,300]SPF[/glow]

USP and Holster [glow=red,2,300]SOLD[/glow]
Gemtech G5 and barrel extension set [glow=red,2,300]SPF[/glow]

[Felix]

Will not fit on G36 without the smallest piece of the barrel extension set, but still have to unscrew flash hider to remove hand guard for battery installation/removeal as the quick attach/detach tabs block the hand guard from comes off.

My G36c would love your mock silencer, but im a little confused at what your saying. My guess is that i need the screw on barrel extencions that would poke through the handguard to screw the mock silencer on?

[Jeremy314]

Basically, yes. Sorry for the confusion. You can put the flash hider on by it self, but you can not use the mock suppresor as the hand guard prevents you from attaching it. So you use the smallest part of the extention to push it away from the hand guard and then you can use the mock suppressor.

Forgot about that package deal:
GEMTECH G5 + Extension set: $35

[Felix]

hold that package aside, i may be able to get a little dough by the 16th

[IronChef]

u can also dremel out the handguard a bit to fit the supressor...i did that with the sl9

[Bushmaster]

It depends on the handguard, my small-style(yes, there are two different sizes) fits with the suppressor just fine.

[Pip Bernadotte]

If you still have the USP Tactical and 3 mags i'd like to grab it from you ^_^
If you're going to Fulda Gap next weekend can I get it from you then?

Thanks,

Henry

[Rev]

I will be at Fulda if you work it out with Jeremy I can take it up there for him. That is all up to him though.

[Jeremy314]

It depends on the handguard, my small-style(yes, there are two different sizes) fits with the suppressor just fine.

Since when did you get a G5 Jakob? You have to push the suppressor down then turn it. With out the barrel extension all you can do it slide it on but not push it down much less turn it.

So Felix, do you want the G5 and barrel set?

And Pip Send me a PM and we can talk about the USP.

[Bushmaster]

We were talking about the G36...

My G36c would love your mock silencer, but im a little confused at what your saying. My guess is that i need the screw on barrel extencions that would poke through the handguard to screw the mock silencer on?

[Jeremy314]

We were talking about the G36...

yes we are talking about a G36 with a G5 mock suppressor.. since when did you get a G5? Thought you had the KAC M4 style which is different then the Gemtech G5...

[Bushmaster]

I don't have one, but I put one on at one point, to see how it looked.

[craicAddict]

jeremy, are you going to have the g36 gear with you this saturday? I'd like to check out some of the barrel extension stuff

[Jeremy314]

jeremy, are you going to have the g36 gear with you this saturday? I'd like to check out some of the barrel extension stuff

Yeah, I'll have it with me. But I have someone interested in the G5 and maybe the extension set unless  you would like the 2 longer extensions, then he'd be happy with the shortest one for the G5.

[Jeremy314]

USP and Holster are now [glow=red,2,300]SOLD[/glow]

Gemtech G5 and barrel extension set are [glow=red,2,300]SPF[/glow]


Removed sold items from listing.

Please someone at least make me an offer on the G36. You cant get this package deal for a better price!