Echo1 P90 semi-auto issue

Tzer1993 · Post by **Tzer1993** » Tue Sep 29, 2009 7:49 pm

Okay so here's the deal:
Just got this Echo1 P90(used) a few weeks ago and the semi-auto would not work properly --- it would take a few pulls to get a shot out --- so I sprayed some contact cleaner on the contacts and it worked good for about a mid-cap worth of shots and now it wont fire on semi at all. Any ideas as to what's going down?

Post by **Dominum** » Tue Sep 29, 2009 7:57 pm

Check the cutoff lever for wear, and make sure the metal bars that connect the actual trigger to the gearbox are in place properly.

Unfortunately this is a very common problem for most P90 models that sometimes can't be resolved due to the low tolerances at which the Chiclone models' parts are manufactured.

Tzer1993 · Post by **Tzer1993** » Tue Sep 29, 2009 8:00 pm

Dominum wrote: Check the cutoff lever for wear, and make sure the metal bars that connect the actual trigger to the gearbox are in place properly.

Unfortunately this is a very common problem for most P90 models that sometimes can't be resolved due to the low tolerances at which the Chiclone models' parts are manufactured.

Translation: Buy better parts. Gotcha

I'll see what I can do...

Tzer1993 · Post by **Tzer1993** » Wed Sep 30, 2009 9:32 am

Well I got it working...for the time being
I just had to carve the black gunk of the contacts with a razor... $:-\$

MetalWarrior · Post by **MetalWarrior** » Wed Sep 30, 2009 5:17 pm

Yea, if there is wear on the cutoff lever, I would suggest getting a new one considering that I have had the same problem.

Post by **Dominum** » Wed Sep 30, 2009 5:18 pm

MW now has perfect three round burst if he pulls the trigger right on semi

*AOSC Forum Archive

Echo1 P90 semi-auto issue

Echo1 P90 semi-auto issue

Re: Echo1 P90 semi-auto issue

Re: Echo1 P90 semi-auto issue

Re: Echo1 P90 semi-auto issue

Re: Echo1 P90 semi-auto issue

Re: Echo1 P90 semi-auto issue