Trigger locking on semi-auto

Muff-in · Post by **Muff-in** » Wed Mar 21, 2012 11:48 pm

Ok so I just finished lubing everything inside my gearbox. I put everything back together and realized whenever I shoot the gun on semi-auto, the trigger stays back and I have to push it forward to shoot again. It works fine on full auto. Anybody know the cause of this?

Post by **SteevoLS** » Thu Mar 22, 2012 6:22 am

You probably forgot the trigger spring.

Muff-in · Post by **Muff-in** » Thu Mar 22, 2012 3:59 pm

No. I'm not that ignorant

It springs back just fine on full-auto so that couldn't be the case.

Post by **Star_folder** » Thu Mar 22, 2012 4:02 pm

Muff-in wrote:No. I'm not that ignorant It springs back just fine on full-auto so that couldn't be the case.

Nope, that's definitely the issue. It springs back on full auto because the trigger sled spring pulls the trigger back in place. You are missing your main trigger spring. You'll need to open up your gearbox and reinstall it, or install it correctly.

Muff-in · Post by **Muff-in** » Thu Mar 22, 2012 11:05 pm

Ok, so it is installed, but I must not have it in correctly. How is the spring supposed to go in? I've looked for tutorials but can't seem to find any.

Foxx · Post by **Foxx** » Thu Apr 12, 2012 8:38 am

If it's anything like the AEG's I've worked on; try to find the most difficult place it will fit in, then shred your fingers up for half an hour trying to put it there.

slimshady222 · Post by **slimshady222** » Sun Apr 15, 2012 2:32 pm

Theres a hole in the top part of the trigger you put the small part of the spring in there and youll probably figure out the rest.

*AOSC Forum Archive

Trigger locking on semi-auto

Trigger locking on semi-auto

Re: Trigger locking on semi-auto

Re: Trigger locking on semi-auto

Re: Trigger locking on semi-auto

Re: Trigger locking on semi-auto

Re: Trigger locking on semi-auto

Re: Trigger locking on semi-auto