Page 1 of 1
Mac 11 Doesn't fire
Posted: Mon Jan 03, 2011 5:17 pm
by Rage
Okay so I have a mac 11 and it doesn't fire a single shot. When I load the mag and put it in and shoot it it will collect all the bb's in the barrel and then fall out when I tilt the gun down. Can anyone help me with this I have changed the rubber piece right before the barrel. But that didn't help.
Re: Mac 11 Doesn't fire
Posted: Mon Jan 03, 2011 5:29 pm
by PRincess
What brand is it? HFC or KWA?
Re: Mac 11 Doesn't fire
Posted: Mon Jan 03, 2011 5:45 pm
by Rage
I don't know it doesn't say anywhere on the gun what it is.
Re: Mac 11 Doesn't fire
Posted: Mon Jan 03, 2011 6:24 pm
by Esteban
Look up some take-down videos on Youtube to start with. Check to see if the parts look similar and see if anything is broken. Your loading nozzle might be broken, or a spring might be missing, or something dumb like that.
Re: Mac 11 Doesn't fire
Posted: Mon Jan 03, 2011 6:58 pm
by Rage
Well I've taken it completely apart and nothing is missing and nothing looks broken. But I will look again it never hurts to check twice.
Re: Mac 11 Doesn't fire
Posted: Tue Jan 04, 2011 6:57 pm
by Esteban
Make sure moving parts slide easily. You may want to add silicone lubricant to the moving parts and the rubber parts.
Re: Mac 11 Doesn't fire
Posted: Fri Jan 07, 2011 4:45 pm
by Dominum
Sounds like a jam, turn the hopup all the way off and clean the barrel per the instructions in "Dom's Tech Tips".
Re: Mac 11 Doesn't fire
Posted: Fri Jan 07, 2011 5:18 pm
by Rage
I can't seem to locate the hope up on this gun. I know it sounds silly but it is like it's not there.
Re: Mac 11 Doesn't fire
Posted: Fri Jan 07, 2011 6:05 pm
by Dominum
It is a rotary dial with crenelation, see google.