Page 1 of 1
Javelin m16
Posted: Fri May 11, 2012 9:17 pm
by Nabors
So I took apart my javelin m16 to find out that the 6mm stainless steel modify bushings I got are not the right size. I have been trying to figure out what size they are. I can't seem to find a reliable answer. if anyone knows what size they are i would be greatly appreciated.
The m16 i have:
http://www.airsoftgi.com/product_info.p ... ts_id=7528
Re: Javelin m16
Posted: Sat May 12, 2012 10:02 pm
by Star_folder
It's actually a pretty easy solution. If what you have now is 6mm, and you want to know if the bushings in the gun are 7mm or 8mm. If your 6mm bushings can fit all the way through, you can drop them through the hole, then they are 8mm bushings. If they don't go through the hole, but wobble around a bit, they are 7mm bushings.
Re: Javelin m16
Posted: Sat May 12, 2012 10:20 pm
by Nabors
They dont fit they wobble around but every place I looked is saying 8mm.
Re: Javelin m16
Posted: Sat May 12, 2012 10:28 pm
by Vesper
Nabors wrote:They dont fit they wobble around but every place I looked is saying 8mm.
When in doubt, get both. At least you'll have spare parts.
Besides, bushings aren't terribly expensive either.