Page 1 of 1
Spring SVD Sear
Posted: Wed May 22, 2013 4:32 pm
by ibeezthecapn
ok so on my svd.
the sear lowers when the trigger is pulled and the piston is NOT cocked.
however once the piston is cocked the trigger goes past fire point all the way to body of gun with no resistance and no firing.
halp plase
Re: Spring SVD Sear
Posted: Wed May 22, 2013 4:48 pm
by Dominum
Something inside the trigger/sear housing is wrong.
Re: Spring SVD Sear
Posted: Wed May 22, 2013 5:37 pm
by ibeezthecapn
Dominum wrote:Something inside the trigger/sear housing is wrong.
well, yeah. i was hoping someone may know what spcifically from experience before i break this gun down. again. fourth time in a week but never had this issue before
Re: Spring SVD Sear
Posted: Wed May 22, 2013 5:54 pm
by Dominum
You're going to have to break it down either way...
Re: Spring SVD Sear
Posted: Wed May 22, 2013 9:17 pm
by ibeezthecapn
Dominum wrote:You're going to have to break it down either way...
i lucked out. i overtightened when installing new spring. backed screw out like 1/4 turn and trigger pull works and fires like buttah