Page 1 of 1
wicked arch when fireing
Posted: Sun Jan 31, 2010 2:42 pm
by truckman
once the gun is fired the BB travels about thirty feet then goes straight down. i tried adjusting the hop up, it made it worst. does this sound like a bent barrel or something minor. pm me also this is a jg m4 all original
Re: wicked arch when fireing
Posted: Sun Jan 31, 2010 4:40 pm
by severed
dirty barrel or ripped hopup rubber
Re: wicked arch when fireing
Posted: Sun Jan 31, 2010 7:27 pm
by Dominum
...or the barrel is bent, the bucking slipped/rotated, the nub came out or is in sideways, the lever of the chamber is broken, the chamber is broken in some other manner, there is lube in the barrel/on the bucking, etc. Remove the barrel and check all parts in question, or bring it to either Grimwulf or myself.
Re: wicked arch when fireing
Posted: Sun Jan 31, 2010 9:18 pm
by IronChef
sounds like what happened to my umg....bucking was bad...but intead of going staright down....curved up after 20 ft
Re: wicked arch when fireing
Posted: Sun Jan 31, 2010 10:16 pm
by Esteban
Do you need directions on how to take out the hopup unit to investigate?
Re: wicked arch when fireing
Posted: Thu Feb 11, 2010 12:40 am
by truckman
thanks guys i found the problem and fixed it good as new now..
Re: wicked arch when fireing
Posted: Thu Feb 11, 2010 3:54 pm
by Dominum
...Care to elaborate?