Latest Acquisition
-
- I like this place!
- Posts: 95
- Joined: Wed Nov 25, 2009 10:18 am
- Location: Fort Mill, SC
Re: Latest Acquisition
ACM Maruzen clone, Walther PPK. Not a bad little gun for the money, but the magazine literally blew up after I filled it with propane a second time. I am probably going to pick up a few spare Maruzen mags in the next couple of weeks.
[img width=607 height=391]http://i54.photobucket.com/albums/g111/ ... PK-2-f.jpg[/img]
Its pretty, but its not exactly the best shooter. It only shoots about 250fps with .2's and propane. It has an adjustable hop up, but it didnt seem to help all that much.
[img width=607 height=391]http://i54.photobucket.com/albums/g111/ ... PK-2-f.jpg[/img]
Its pretty, but its not exactly the best shooter. It only shoots about 250fps with .2's and propane. It has an adjustable hop up, but it didnt seem to help all that much.

-
- I love forums!
- Posts: 285
- Joined: Sun Oct 18, 2009 11:38 pm
- Location: Myrtle Beach, SC
- Contact:
Re: Latest Acquisition
Regardless of performance it is a nice little gun just to look at and mess around the backyard with.
Last edited by von_lounger on Fri Jul 09, 2010 8:34 pm, edited 1 time in total.
- Bushmaster
- I do in fact have a life.
- Posts: 1671
- Joined: Sat Oct 10, 2009 1:34 pm
- Location: Alcolu, SC
Re: Latest Acquisition
That is sweet!
"Do not pray for an easy life, pray for the strength to endure a difficult one." - Bruce Lee
Re: Latest Acquisition
nice, i actually thought of getting one but decide against it for some odd reason.
[img width=400 height=25]http://i444.photobucket.com/albums/qq16 ... 33USER.jpg[/img]
Re: Latest Acquisition
Looks good Neil.
Yes Vesper, a double sector gear means that every rotation of the sector gear yeilds two rnds fired, as opposed to one. I just finished putting it into the P90; with a standard ratio spur and bevel gear (Systema reinforced ones), it has a Mosfet, TM EG1000, 7mm bb bushings, steel bb guide rod with about a 1/3 inch group of spacers, short stiff linear M120, bb piston head, JBU aluminum piston with full steel teeth, second to last gone, and the first 8 teeth dremeled off by me (took about 30 min) so that it will fit with the new double sector gear, and a modified tappet plate for the same reason.
On a crappy Chiclone 11.1v LiPo it clocked at 33 rnds per second, and is still very quiet. On a quality 20C LiPo it is likely to be insane, especially if I install highspeed gears and a faster motor.
Yes Vesper, a double sector gear means that every rotation of the sector gear yeilds two rnds fired, as opposed to one. I just finished putting it into the P90; with a standard ratio spur and bevel gear (Systema reinforced ones), it has a Mosfet, TM EG1000, 7mm bb bushings, steel bb guide rod with about a 1/3 inch group of spacers, short stiff linear M120, bb piston head, JBU aluminum piston with full steel teeth, second to last gone, and the first 8 teeth dremeled off by me (took about 30 min) so that it will fit with the new double sector gear, and a modified tappet plate for the same reason.
On a crappy Chiclone 11.1v LiPo it clocked at 33 rnds per second, and is still very quiet. On a quality 20C LiPo it is likely to be insane, especially if I install highspeed gears and a faster motor.
Last edited by Dominum on Fri Jul 09, 2010 11:48 pm, edited 1 time in total.
[align=center]

[align=center]"Searching for my goats since 2009"
"All you have done here is take the typical leftist line and regurgitate it in a barely palatable,
quasi poetic, pseudo intellectual format. Quite frankly, that makes you a moron."[/align]
▲
▲ ▲
[align=center]V[/align]
Re: Latest Acquisition

Kill bodies and slay dragons.
Re: Latest Acquisition
Darn she's sexy.
-
- I love forums!
- Posts: 285
- Joined: Sun Oct 18, 2009 11:38 pm
- Location: Myrtle Beach, SC
- Contact:
Re: Latest Acquisition
That's a pretty sweet torch! What is that little thing attached to it though? ;)
Re: Latest Acquisition
Thanks guys!
That thing Nick? I enjoy lighting people up from time to time, and as we all know, bigger is better!
That thing Nick? I enjoy lighting people up from time to time, and as we all know, bigger is better!


Kill bodies and slay dragons.
Re: Latest Acquisition
in less you are just compensating for something elseMCG wrote: Thanks guys!
That thing Nick? I enjoy lighting people up from time to time, and as we all know, bigger is better!![]()


[img width=200 height=150]http://i884.photobucket.com/albums/ac46/aprus2/COD1.jpg[/img]
Re: Latest Acquisition
Shut up Dan. Just shut up.Crow wrote: in less you are just compensating for something else![]()
![]()


Kill bodies and slay dragons.
Re: Latest Acquisition
lol, but really, i like the gun 

[img width=200 height=150]http://i884.photobucket.com/albums/ac46/aprus2/COD1.jpg[/img]
Re: Latest Acquisition
HAHA I shot it before you did!!!!!!!!!!!!!!



A Fact of Life: After Monday and Tuesday even the calendar says W T F.....
Severed: if the back up to the back up back up rifle doesn't make people drool, you = fail
Airsoft Vet.
Severed: if the back up to the back up back up rifle doesn't make people drool, you = fail
Airsoft Vet.
-
- I like this place!
- Posts: 95
- Joined: Wed Nov 25, 2009 10:18 am
- Location: Fort Mill, SC
Re: Latest Acquisition
Guarder OD frame just came in. Waiting on the black controls.
[img width=650 height=408]http://i54.photobucket.com/albums/g111/ ... veN2-f.jpg[/img]
[img width=650 height=408]http://i54.photobucket.com/albums/g111/ ... veN2-f.jpg[/img]

Re: Latest Acquisition
Inked wrote: HAHA I shot it before you did!!!!!!!!!!!!!!![]()
![]()
![]()
Well actually I shot it for the first time at Redfox back in February


Kill bodies and slay dragons.