Latest Acquisition

[Trig]

USC NROTC.

[angelmaker]

They give a military ID for being in ROTC?

[Trig]

The Navy is paying for my college.  First 2 acronyms Navy Reserve.

[Bushmaster]

These aren't my pictures, but I did get all of the following...

Magpul AFG:
[img width=480 height=312]http://i51.tinypic.com/9a8k80.jpg[/img]

Scoped G36 carry handle:
[img width=600 height=478]http://i55.tinypic.com/osqudc.jpg[/img]

Tan and black shemagh:
[img width=300 height=300]http://i55.tinypic.com/fdwpyv.jpg[/img]

Real German Wustentarn (same thing as Tropentarn):
[img width=400 height=417]http://i56.tinypic.com/2v13dyp.jpg[/img]


Soon to come: MICH TC-2002.

[Doublewolf]

I did some work on the 416 I just bought.

I redid the fuse box. I made the wires longer so that I could flip the PEQ box around and put a laser in it. Now the PEQ box actually works.

The rails were a bit wobbly, so I bought a new locking nut, spraypainted it black, and put it on. The rails don't wobble anymore.

I also put on a flash hider. Yeah, It's orange, but it's better than not having one. Besides, orange is my favorite color. I don't know why I tried to remove the tip from my M4.

Anyways, this thing is near perfect. It just has a mechanical issue, so sometimes 2 bbs come out on semi. That isn't a big deal though, and I'll fix it when I get some more money. Full Auto works just fine.



[img width=160 height=120]http://s4.postimage.org/5LxdJ.jpg[/img]

[SteevoLS]

All you have to do to stop the rail wobble on chinese 416s is...

1. Remove locking screw at base of rail
2. Tighten delta ringish object on the receiver
3. Firmly replace rail and tighten down the locking screw
4. ? ? ?
5. Profit!

[Doublewolf]

All you have to do to stop the rail wobble on chinese 416s is...

1. Remove locking screw at base of rail
2. Tighten delta ringish object on the receiver
3. Firmly replace rail and tighten down the locking screw
4. ? ? ?
5. Profit!

No. I tried that. It was that the big square oddly shaped nut type thingy was stripped.

[IronChef]

whatever you do, DONT USE A HACKSAW!!!!!!!!!!!

[SteevoLS]

Somewhat crappy picture courtesy of my phone.

DBoys 416 front sight
Troy Claymore flashhider
Daniel Defense offset QD front sling mount
Ambidextrous rear QD sling mount

Oddly the DBoys front sight sits just slightly lower than the JG rear sight. I'll have to pick up the DBoys rear sight soon to fix that problem.

[Joshua]

Can't hit crap anyways. Don't worry about getting a rear sight... 
Hot sh!t Steevo. Now your banned from posting until a page of this tread doesn't have one of your pictures. 

[Felix]

These are crappy pictures, but this is my semi-new Echo1 G36c with a 4x scope and foregrip. Bought it from Slate and its been working well


[img width=160 height=120]http://s1.postimage.org/g96PA.jpg[/img]

[img width=160 height=120]http://s1.postimage.org/g9jii.jpg[/img]

[von_lounger]

Looking good Steevo! The initial pieces for my 416 project should be arriving shortly.

[SteevoLS]

Can't find the camera, so my phone will have to do...

- Velcro'd watch cap + some weird patch with triangles on it
- Health meter

[Gambler]

I dig the new patches Steevo.  Very nice!

[von_lounger]

Well the replacement for my KWA M4 showed up today.

VFC SCAR-L

[img width=798 height=341]http://i96.photobucket.com/albums/l163/ ... oto-10.jpg[/img]