AOSC Forum Archive

Your standard L96 barrel. Does not have the grooves to lock the hop up unit to the barrel. Also the groove for the bucking is in the opposite side.
[img width=400 height=300]http://www.x-fire.org/09hobbyshow/IMG_3597.JPG[/img]

After about 15 min with a drimel tool that has changed. Sorry about the photos. Taken with my cell.
Standard CA barrel on the right in blue. Cut L96 barrel on the left
[img width=640 height=480]http://img43.imageshack.us/img43/6843/img031rd.jpg[/img]
[img width=640 height=480]http://img196.imageshack.us/img196/4885/img032h.jpg[/img]

Added a little length to the overall look and feel of the gun.
[img width=640 height=480]http://img40.imageshack.us/img40/7060/img035p.jpg[/img]
[img width=640 height=480]http://img36.imageshack.us/img36/9969/img036q.jpg[/img]

[img width=640 height=480]http://img11.imageshack.us/img11/5083/img034sh.jpg[/img]

Compared to my M16
[img width=640 height=480]http://img38.imageshack.us/img38/826/img037no.jpg[/img]

Why not put on a silencer?

Bushmaster wrote: Why not put on a silencer?

Gave it to Tzer, and had this laying around.

does it work???

Were you able to recreate the crowned edge on the L96 barrel? That's the most common hangup I've seen on home-cut barrels.

IronChef wrote: does it work???

For sure man. Gave me some sick groupings, and actually a little more range.

SteevoLS wrote: Were you able to recreate the crowned edge on the L96 barrel? That's the most common hangup I've seen on home-cut barrels.

I didn't actually have to cut the barrel. Just put the grooves in for the hop up unit, and routed a new groove on the opposite side for the bucking.

Oh Garrett I have a midget silencer with foam inserts that you can have you'll just have to do some ghetto rigging

Nice work Garrett, looks like that turned out well!

Not sure how I missed this post awhile back