Best 6.01 tbb for the price?

[Dominum]

I have never denied your experience, Dom. I have never said I had more or better experience. I don't live in a central area for most of the airsofters in SC to get to work on their guns. But as we grow in numbers in the MB area I'm sure I will gain more knowledge and experience. I apologize for what I had written here earlier, as it wasn't that appropriate and was in response to, what  seemed to me, a personal attack on my limited tech experience.

But here is what I am talking about straight from KWA:

That wasn't directed at you, sorry if it seemed to have been. I think you have learned a great deal so far and I didn't take offense from anything you said and certainly didn't mean to slight you, that was in response to a prior post. I respect that you are learning and are putting in a lot of effort to work on guns and teach yourself and gain from others' experience.

[Gambler]

Smokw, I have 6 guns and am pretty much only using the KWA's so you don't have to convert me.

[Dominum]

I'll take your word for it....since you really seem to know the kwa's like the back of your hand...lol

Yeah, because an M130's power with a 6.01mm has everything to do with the manufacturer

Id bet it settles to about 470 give or take 5 fps

Guarder m130= aprox. 450 fps with edgi 6.01 tightbore = aprox. 20 to 30 fps.= 470-480
which in my book is close to 500 fps 

M130 (except for Madbull) fires a .20 at ~430 FPS, and even if you got a great 30 FPS boost from the 6.01mm you'd still be well below 500 FPS.

[Smoke]

Smokw, I have 6 guns and am pretty much only using the KWA's so you don't have to convert me.

Excellent...everyone on my squad runs kwa aeg's  except one excluding the sniper's of course :  ....But i have been thinking if to many guys are converted then those of us with the kwa'a won't have the advantage anymore.....lol

[Smoke]

can you explain why i get 380 fps with a kwa sr5 that has a m100 spring and without any mods except a tightbore?   

[Jeremy314]

Unless you got one with KWA's 0.5 cylinder and something other then the stock KWA equivalent M110 spring, you would be shooting at 350 or below. Granted KWA has outstanding compression, the SR5 and SR7 have the same exact gearbox even the same KWA equivalent M110 and should be shooting at 350ish. I don't know what TBB you've got in there, but I've never heard of a jump of 30 FPS with just a TBB.

[Dominum]

M100 + good compression and spacers (bb guide rod or piston head act as spacers) PLUS a TBB and a good seal in the chamber add up to... about 380 FPS.

Wow!

[Dominum]

I don't know what TBB you've got in there, but I've never heard of a jump of 30 FPS with just a TBB.

Agreed, 30 FPS is very optimistic, but I figured I'd give him the benefit of the doubt with the numbers.

[Smoke]

It came stock shooting @350    ......  after pdi 6.01 tightbore it jumped to 380

same thing with a kwa s-system came stock shooting @390  after pdi 6.01 tightbore it shoots around 420.... 

[Dominum]

can you explain why i get 380 fps with a kwa sr5 that has a m100 spring and without any mods except a tightbore? 

^Then why did you ask me to explain this to you?

[Dominum]

No one is disputing that...

[SteevoLS]

Hey, I'm thinking about upgrading my gun.. which brand of tightbore is generally considered to be the best?

Oh I'm sorry, I forgot what this thread is about.