CAN SOMEONE HELP

[calebbrady]

can somebody help get my flashider off of my JG G36C

[Doublewolf]

Don't use a hacksaw. 

[Rev]

Does it have the little allen screw  on the bottom of it that you need to remove? If it doesn't or you have and it doesn't come off still it is that nasty glue they use. You will need a heat gun or something that can melt the glue then it should come right off.

[theboss62]

Does it have the little allen screw  on the bottom of it that you need to remove? If it doesn't or you have and it doesn't come off still it is that nasty glue they use. You will need a heat gun or something that can melt the glue then it should come right off.

heat flash hider not the whole gun

[Jeremy314]

He didn't say anything about heating up the whole gun... he said to use a heat gun...

[Rev]

If you heat the  whole gun then pick it up it will give you a great sensation.

[calebbrady]

it didnt come with a allen screw and i have already tried that

[Jeremy314]

Did you use a heat gun or a hair dryer? If you're using a hair dryer it won't reach the temp required to  melt the glue enough for you to twist it off.

Are you turning it CCW (Lefty tighty, Righty loosey)?

[calebbrady]

yup

[Echo1 Operator]

Heat it with a lighter, and then use vise grips.  It's a minor inconvenience to remove orange tips, but ECHO 1 wants the customers to receive their quality airsoft guns without hassle.

[calebbrady]

i have tried that atleast five times and i got my cousin to try and he couldnt do it either

[splatmaster]

Boil some water(or just put a coffee cup two thirds full in the microwave for a minute or two) and put the end of the barrel strait in. Leave it for a couple minutes, then immediately attempt vise grips/pliers. Also, it is REVERSE THREADED!!! Do the opposite direction of a normal thread, lefty tighty righty loosey.

[Doublewolf]

Heat it with a lighter, and then use vise grips.  It's a minor inconvenience to remove orange tips, but ECHO 1 wants the customers to receive their quality airsoft guns without hassle.

Are you sponsored by Echo 1 or something? First you say they're the best, then you specifically say that Echo 1 wants customers to recieve thier guns w/o hassle, like other manufacturers don't. Haha.

[Echo1 Operator]

Redwolf and other overseas retailers aren't known for their awesome customer service.  I don't think Tokyo Marui even cares about US customers.  Echo1 leads the way in customer appreciation!

[Jeremy314]

Duuuuuude... DW.. dont' feed the troll man... just stop responding to him and eventually he'll go away....