Upgrades for jg r36c

[TokenTech89]

no. you would need to get a lipo battery charger to charge them up.

[JumpGunner]

I had the same issues with an Echo 1 MP5. The GB has a window by the back of the spring and the piston was catching in it. I filed an angle into the grooves and put in a new piston. No further problems. So I would say check to see if there is binding in the spring or the piston. Just my my past experience but could help.

[jakger]

Well will a 9.6v fix it?

[JumpGunner]

Well will a 9.6v fix it?

If you are refering to the binding, No. If it is binding than there would be an object block the natural cycle of the GB. If you put a bigger battery in you could run the risk of stripping gears or burning up your motor.

[Star_folder]

If it was binding on the gearbox, it wouldn't cycle at all. But that's not the issue here. Yes, a 9.6v will most likely fix your problem. It will certainly not harm your gun any more than the battery you are using now.

[jakger]

K thanks because it will complete the cycle

[jakger]

were is that 50 $ lipo and charger

[Stomper87]

Here are the batteries that I use: http://www.hobbyking.com/hobbyking/stor ... P_20C.html

Only $7.55, which is why I have almost ten of them. As for the connector, it uses an XT60 connector, which is similar to deans, and is an upgrade from standard small type connectors.

Connectors: http://www.hobbyking.com/hobbyking/stor ... duct=10414
($2.44)

This is the charger I use: http://www.evike.com/product_info.php?c ... s_id=30777
($25)

So for about $35, you can have a battery, three connectors, and a charger. And yes, this battery will fit in the handguard of your g36, because it is the size of an 8.4v battery.

[jakger]

id rather just buy it all at one place get them get it to me ready to go

[SteevoLS]

Don't ask for advice, then reject it. That having been said, there are quite a few decent chargers on Hobby King.

[jakger]

ok so a 7.4v lipo wont mess up my gun?

[Bishop]

That has been stated dozens of times in this thread. NO it WON'T. You have had almost all the techs in SC tell you exactly what you need to do to fix the problem, just follow the advice that has been given.

[Stomper87]

id rather just buy it all at one place get them get it to me ready to go

I never said this is the charger you SHOULD buy, I was just stating that this is the charger I use. As SteevoLS said, there are some cheap, decent chargers on hobbyking.

[jakger]

ok well thanks to you all